summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--rules.mk1
-rwxr-xr-xscripts/install-chroot.sh113
-rwxr-xr-xscripts/install.sh2
-rw-r--r--target/Config.in55
-rw-r--r--target/Config.in.x864
-rw-r--r--target/Config.in.x86_6415
-rw-r--r--target/linux/config/Config.in.netdevice62
-rw-r--r--target/x86/target.mk2
-rw-r--r--target/x86_64/target.mk2
9 files changed, 121 insertions, 135 deletions
diff --git a/rules.mk b/rules.mk
index ea59f4d86..0724a67b1 100644
--- a/rules.mk
+++ b/rules.mk
@@ -32,6 +32,7 @@ ADK_VENDOR:= $(strip $(subst ",, $(ADK_VENDOR)))
ADK_TARGET_IP:= $(strip $(subst ",, $(ADK_TARGET_IP)))
ADK_TARGET_SUFFIX:= $(strip $(subst ",, $(ADK_TARGET_SUFFIX)))
ADK_COMPRESSION_TOOL:= $(strip $(subst ",, $(ADK_COMPRESSION_TOOL)))
+ADK_TARGET_CFLAGS:= $(strip $(subst ",, $(ADK_TARGET_CFLAGS)))
ifeq ($(strip ${ADK_HAVE_DOT_CONFIG}),y)
ifneq ($(strip $(wildcard $(TOPDIR)/target/$(ADK_TARGET)/target.mk)),)
diff --git a/scripts/install-chroot.sh b/scripts/install-chroot.sh
index cab2e6d7f..23adeb17b 100755
--- a/scripts/install-chroot.sh
+++ b/scripts/install-chroot.sh
@@ -45,15 +45,19 @@ else
fi
cfgfs=1
-rb532=0
-while getopts "nr" option
+console=0
+serial=0
+while getopts "nrcs" option
do
case $option in
n)
cfgfs=0
;;
- r)
- rb532=1
+ s)
+ serial=1
+ ;;
+ c)
+ console=1
;;
*)
printf "Option not recognized\n"
@@ -78,18 +82,6 @@ else
printf "$2 is not a file, Exiting\n"
exit 1
fi
- if [ $rb532 -eq 1 ];then
- if [ -z $3 ];then
- printf "Please give the kernel as third parameter\n"
- exit 2
- fi
- if [ -f $3 ];then
- printf "Installing $3 on $1\n"
- else
- printf "$3 is not a file, Exiting\n"
- exit 1
- fi
- fi
if [ -b $1 ];then
printf "Using $1 as CF/USB disk for installation\n"
printf "This will destroy all data on $1, are you sure?\n"
@@ -141,29 +133,9 @@ case $2 in
;;
esac
-if [ $rb532 -ne 0 ];then
- printf "Create partition and filesystem for rb532\n"
- rootpart=${1}2
- $parted -s $1 mklabel msdos
- sleep 2
- maxsize=$(env LC_ALL=C $parted $1 -s unit cyl print |awk '/^Disk/ { print $3 }'|sed -e 's/cyl//')
- rootsize=$(($maxsize-2))
-
- $parted -s $1 unit cyl mkpart primary ext2 0 1
- $parted -s $1 unit cyl mkpart primary ext2 1 $rootsize
- $parted -s $1 unit cyl mkpart primary fat32 $rootsize $maxsize
- $parted -s $1 set 1 boot on
- $sfdisk --change-id $1 1 27
- $sfdisk --change-id $1 3 88
- sleep 2
- $mke2fs ${1}2
- sync
- dd if=$3 of=${1}1 bs=2048
- sync
-else
- rootpart=${1}1
- if [ $cfgfs -eq 0 ];then
- printf "Create partition and filesystem without cfgfs\n"
+rootpart=${1}1
+if [ $cfgfs -eq 0 ];then
+ printf "Create partition and filesystem without cfgfs\n"
$sfdisk $1 << EOF
,,L
;
@@ -171,20 +143,19 @@ $sfdisk $1 << EOF
;
y
EOF
- $mke2fs ${rootpart}
- else
- printf "Create partition and filesystem with cfgfs\n"
- $parted -s $1 mklabel msdos
- sleep 2
- maxsize=$(env LC_ALL=C $parted $1 -s unit cyl print |awk '/^Disk/ { print $3 }'|sed -e 's/cyl//')
- rootsize=$(($maxsize-2))
-
- $parted -s $1 unit cyl mkpart primary ext2 0 $rootsize
- $parted -s $1 unit cyl mkpart primary fat32 $rootsize $maxsize
- $parted -s $1 set 1 boot on
- $sfdisk --change-id $1 2 88
- $mke2fs ${1}1
- fi
+ $mke2fs ${rootpart}
+else
+ printf "Create partition and filesystem with cfgfs\n"
+ $parted -s $1 mklabel msdos
+ sleep 2
+ maxsize=$(env LC_ALL=C $parted $1 -s unit cyl print |awk '/^Disk/ { print $3 }'|sed -e 's/cyl//')
+ rootsize=$(($maxsize-2))
+
+ $parted -s $1 unit cyl mkpart primary ext2 0 $rootsize
+ $parted -s $1 unit cyl mkpart primary fat32 $rootsize $maxsize
+ $parted -s $1 set 1 boot on
+ $sfdisk --change-id $1 2 88
+ $mke2fs ${1}1
fi
if [ $? -eq 0 ];then
@@ -211,12 +182,13 @@ printf "Fixing permissions\n"
chmod 1777 $tmp/tmp
chmod 4755 $tmp/bin/busybox
-if [ $rb532 -eq 0 ];then
- printf "Installing GRUB bootloader\n"
- mkdir -p $tmp/boot/grub
- mount -o bind /dev $tmp/dev
- chroot $tmp mount -t proc /proc /proc
- chroot $tmp mount -t sysfs /sys /sys
+printf "Installing GRUB bootloader\n"
+mkdir -p $tmp/boot/grub
+mount -o bind /dev $tmp/dev
+chroot $tmp mount -t proc /proc /proc
+chroot $tmp mount -t sysfs /sys /sys
+
+if [ $serial -eq 1 ];then
cat << EOF > $tmp/boot/grub/grub.cfg
set default=0
set timeout=1
@@ -230,12 +202,27 @@ menuentry "GNU/Linux (OpenADK)" {
linux /boot/vmlinuz-adk ro init=/init console=ttyS0,$speed console=tty0 panic=10
}
EOF
- chroot $tmp grub-install $1
- umount $tmp/proc
- umount $tmp/sys
- umount $tmp/dev
fi
+if [ $console -eq 1 ];then
+cat << EOF > $tmp/boot/grub/grub.cfg
+set default=0
+set timeout=1
+terminal_output console
+terminal_input console
+
+menuentry "GNU/Linux (OpenADK)" {
+ insmod ext2
+ set root=(hd0,1)
+ linux /boot/vmlinuz-adk ro init=/init console=tty0 panic=10
+}
+EOF
+fi
+
+chroot $tmp grub-install $1
+umount $tmp/proc
+umount $tmp/sys
+umount $tmp/dev
umount $tmp
printf "Successfully installed.\n"
diff --git a/scripts/install.sh b/scripts/install.sh
index 3e07a7181..98a93bdb5 100755
--- a/scripts/install.sh
+++ b/scripts/install.sh
@@ -21,6 +21,8 @@ fi
cfgfs=1
quiet=0
+console=0
+serial=0
while getopts "nq" option
do
case $option in
diff --git a/target/Config.in b/target/Config.in
index 66e6fd1b4..684382e1c 100644
--- a/target/Config.in
+++ b/target/Config.in
@@ -170,6 +170,20 @@ config ADK_TARGET
default "wag54g" if ADK_wag54g
default "ag241" if ADK_ag241
+config ADK_CPU_I686
+ boolean
+
+config ADK_CPU_PENTIUM_M
+ boolean
+
+config ADK_CPU_AMDFAM10
+ boolean
+
+config ADK_TARGET_CFLAGS
+ string
+ default "-march=i686" if ADK_CPU_I686
+ default "-march=pentium-m" if ADK_CPU_PENTIUM_M
+ default "-march=amdfam10" if ADK_CPU_AMDFAM10
# c library
config ADK_uclibc
@@ -205,12 +219,32 @@ config ADK_LINUX_NATIVE
No toolchain will be created.
config ADK_LINUX_X86_ALIX
- bool "ALIX boards"
+ bool "PC Engines ALIX boards"
select ADK_x86
select ADK_alix
help
Support for Alix boards.
http://www.pcengines.ch
+ Status: stable
+
+config ADK_LINUX_X86_WRAP
+ bool "PC Engines WRAP boards"
+ select ADK_x86
+ select ADK_wrap
+ select ADK_KERNEL_SCSI
+ select ADK_KERNEL_ATA
+ select ADK_KERNEL_BLK_DEV_SD
+ select ADK_KERNEL_EXT2_FS
+ select ADK_KERNEL_NET_PCI
+ select ADK_KERNEL_NETDEVICES
+ select ADK_KERNEL_NET_ETHERNET
+ select ADK_KERNEL_MII
+ select ADK_TARGET_WITH_WATCHDOG
+ select ADK_TARGET_WITH_RTC
+ help
+ End of life.
+ http://www.pcengines.ch/
+ Status: stable
config ADK_LINUX_ARM_FOXG20
bool "Foxboard (FOXG20)"
@@ -328,25 +362,6 @@ config ADK_LINUX_X86_64
help
Support for a x86_64/amd64 system.
-config ADK_LINUX_X86_WRAP
- bool "PC Engines WRAP"
- select ADK_x86
- select ADK_wrap
- select ADK_KERNEL_SCSI
- select ADK_KERNEL_ATA
- select ADK_KERNEL_BLK_DEV_SD
- select ADK_KERNEL_EXT2_FS
- select ADK_KERNEL_NET_PCI
- select ADK_KERNEL_NETDEVICES
- select ADK_KERNEL_NET_ETHERNET
- select ADK_KERNEL_MII
- select ADK_TARGET_WITH_WATCHDOG
- select ADK_TARGET_WITH_RTC
- help
- End of life, but I still have one board.
- http://www.pcengines.ch/
- Status: stable
-
endchoice
choice
diff --git a/target/Config.in.x86 b/target/Config.in.x86
index 86591f1f7..3f5103962 100644
--- a/target/Config.in.x86
+++ b/target/Config.in.x86
@@ -3,12 +3,14 @@ depends on ADK_LINUX_X86
prompt "Hardware model"
config ADK_HARDWARE_GENERIC
- bool "Generic x86 system"
+ bool "Generic x86 system (i686)"
+ select ADK_CPU_I686
help
Generic x86 system.
config ADK_HARDWARE_IBMX40
bool "IBM X40 laptop"
+ select ADK_CPU_PENTIUM_M
select ADK_TARGET_WITH_USB
select ADK_TARGET_WITH_PCI
select ADK_TARGET_WITH_VGA
diff --git a/target/Config.in.x86_64 b/target/Config.in.x86_64
index 82b8f2686..6410078d3 100644
--- a/target/Config.in.x86_64
+++ b/target/Config.in.x86_64
@@ -10,6 +10,7 @@ config ADK_HARDWARE_GENERIC
config ADK_HARDWARE_SHUTTLE
bool "Shuttle PC"
select ADK_shuttle
+ select ADK_CPU_AMDFAM10
select ADK_TARGET_WITH_USB
select ADK_TARGET_WITH_VGA
select ADK_TARGET_WITH_PCI
@@ -21,15 +22,11 @@ config ADK_HARDWARE_SHUTTLE
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_NET_ETHERNET
- select ADK_KERNEL_SATA_AHCI if ADK_TARGET_ROOTFS_ARCHIVE
- select ADK_KERNEL_BLK_DEV_SD if ADK_TARGET_ROOTFS_ARCHIVE
- select ADK_KERNEL_BLK_DEV_MD if ADK_TARGET_ROOTFS_ARCHIVE
- select ADK_KERNEL_MD_RAID0 if ADK_TARGET_ROOTFS_ARCHIVE
- select ADK_KERNEL_MD_RAID1 if ADK_TARGET_ROOTFS_ARCHIVE
- select ADK_KPACKAGE_KMOD_SATA_AHCI if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
- select ADK_KPACKAGE_KMOD_BLK_DEV_MD if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
- select ADK_KPACKAGE_KMOD_MD_RAID0 if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
- select ADK_KPACKAGE_KMOD_MD_RAID1 if ADK_TARGET_ROOTFS_INITRAMFS_PIGGYBACK
+ select ADK_KERNEL_SATA_AHCI
+ select ADK_KERNEL_BLK_DEV_SD
+ select ADK_KERNEL_BLK_DEV_MD
+ select ADK_KERNEL_MD_RAID0
+ select ADK_KERNEL_MD_RAID1
help
Support for a nice and fast shuttle xpc with AMD quad-core CPU.
Status: development
diff --git a/target/linux/config/Config.in.netdevice b/target/linux/config/Config.in.netdevice
index c3a42da09..a5aea22e0 100644
--- a/target/linux/config/Config.in.netdevice
+++ b/target/linux/config/Config.in.netdevice
@@ -2,87 +2,82 @@ menu "Network devices support"
config ADK_KERNEL_NETDEVICES
boolean
- default n
config ADK_KERNEL_NET_ETHERNET
boolean
- default n
config ADK_KERNEL_MII
boolean
- default n
config ADK_KERNEL_NET_PCI
boolean
- default n
config ADK_KERNEL_NETDEV_1000
boolean
- default n
menu "Ethernet card support"
depends on ADK_TARGET_WITH_PCI
config ADK_KPACKAGE_KMOD_NE2K_PCI
prompt "kmod-net-ne2k-pci............. NE2000 PCI driver"
+ tristate
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_MII
- tristate
default n
help
NE2000 pci driver
config ADK_KPACKAGE_KMOD_PCNET32
prompt "kmod-net-pcnet32.............. AMD PCNet32 PCI driver"
+ tristate
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_MII
- tristate
default n
help
AMD PCnet32 driver
config ADK_KPACKAGE_KMOD_8139CP
prompt "kmod-net-rtl8139cp............ RTL8139C+ PCI driver"
+ tristate
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_MII
- tristate
default n
help
RTL8139C+ pci driver
config ADK_KPACKAGE_KMOD_8139TOO
prompt "kmod-net-rtl8139.............. RTL8139 PCI driver"
+ tristate
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_MII
- tristate
default n
help
RTL8139 pci driver
config ADK_KPACKAGE_KMOD_E100
prompt "kmod-net-e100................. Intel(R) PRO/100+ driver"
+ tristate
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_PCI
select ADK_KERNEL_MII
- tristate
default n
help
Intel(R) PRO/100+ cards kernel support
config ADK_KPACKAGE_KMOD_E1000
prompt "kmod-net-e1000................ Intel(R) PRO/1000 Gigabit Ethernet driver"
+ tristate
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_NETDEV_1000
- tristate
default y if ADK_HARDWARE_IBMX40
default n
help
@@ -94,10 +89,11 @@ config ADK_KPACKAGE_KMOD_E1000
config ADK_KPACKAGE_KMOD_SKY2
prompt "kmod-net-sky2................. Marvell Yukon driver"
+ tristate
select ADK_KERNEL_NETDEVICES
select ADK_KERNEL_NET_ETHERNET
select ADK_KERNEL_NETDEV_1000
- tristate
+ default y if ADK_HARDWARE_SHUTTLE
default n
help
@@ -105,52 +101,41 @@ endmenu
config ADK_KERNEL_WIRELESS
boolean
- default n
config ADK_KERNEL_WIRELESS_EXT
boolean
- default n
config ADK_KERNEL_MAC80211_LEDS
- bool
+ boolean
select ADK_KPACKAGE_KMOD_LEDS_CLASS
select ADK_KERNEL_NEW_LEDS
- default n
config ADK_KERNEL_WLAN_80211
boolean
- default n
config ADK_KPACKAGE_KMOD_RT2X00
tristate
- default n
config ADK_KERNEL_RT2X00
boolean
select ADK_KPACKAGE_KMOD_RT2X00
select ADK_KPACKAGE_KMOD_FW_LOADER
select ADK_KPACKAGE_KMOD_EEPROM_93CX6
- default n
config ADK_MOD_KERNEL_CFG80211
tristate
- default n
config ADK_MOD_KERNEL_LIB80211
tristate
- default n
config ADK_KERNEL_CFG80211_WEXT
boolean
- default n
config ADK_KERNEL_ATH_COMMON
tristate
- default n
config ADK_KPACKAGE_KMOD_P54_COMMON
tristate
- default n
config ADK_MOD_KERNEL_MAC80211
tristate
@@ -164,21 +149,18 @@ config ADK_MOD_KERNEL_MAC80211
select ADK_KERNEL_WLAN_80211
default n
-menu "Wireless card support"
-depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_USB || ADK_TARGET_WITH_SSB
-
config ADK_KERNEL_MAC80211_DEBUG_MENU
boolean
- default n
config ADK_KERNEL_MAC80211_VERBOSE_DEBUG
select ADK_KERNEL_MAC80211_DEBUG_MENU
boolean
- default n
config ADK_KERNEL_MAC80211_DEBUGFS
boolean
- default n
+
+menu "Wireless card support"
+depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI || ADK_TARGET_WITH_USB || ADK_TARGET_WITH_SSB
config ADK_KPACKAGE_KMOD_MAC80211
prompt "kmod-mac80211.................. mac80211 softmac"
@@ -200,8 +182,8 @@ config ADK_DEBUG_MAC80211
select ADK_KERNEL_MAC80211_VERBOSE_DEBUG
select ADK_KERNEL_MAC80211_DEBUGFS
select ADK_KERNEL_DEBUG_FS
- default n
depends on ADK_KPACKAGE_KMOD_MAC80211
+ default n
help
config ADK_KPACKAGE_KMOD_ATH5K
@@ -218,10 +200,10 @@ config ADK_KPACKAGE_KMOD_ATH5K
config ADK_KERNEL_ATH5K_DEBUG
prompt "enable debugging info via debugfs"
+ boolean
+ select ADK_KERNEL_DEBUG_FS
depends on ADK_KPACKAGE_KMOD_ATH5K
default n
- select ADK_KERNEL_DEBUG_FS
- boolean
help
Atheros 5xxx debugging messages.
Say Y, if and you will get debug options for ath5k.
@@ -237,8 +219,8 @@ config ADK_KERNEL_ATH5K_DEBUG
config ADK_KPACKAGE_KMOD_B43
prompt "kmod-b43..................... Broadcom B43xx wireless cards"
tristate
- depends on ADK_KPACKAGE_KMOD_MAC80211
select ADK_KPACKAGE_KMOD_FW_LOADER
+ depends on ADK_KPACKAGE_KMOD_MAC80211
depends on ADK_TARGET_WITH_SSB || ADK_TARGET_WITH_MINIPCI
default n
help
@@ -255,11 +237,11 @@ config ADK_KPACKAGE_KMOD_RTL8187
config ADK_KPACKAGE_KMOD_P54_USB
prompt "kmod-p54-usb................. Prism54 USB support"
tristate
- depends on ADK_KPACKAGE_KMOD_MAC80211
- depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
select ADK_KPACKAGE_KMOD_P54_COMMON
select ADK_KPACKAGE_KMOD_FW_LOADER
select ADK_PACKAGE_P54_FIRMWARE
+ depends on ADK_KPACKAGE_KMOD_MAC80211
+ depends on ADK_PACKAGE_KMOD_USB_CONTROLLER
default n
help
Driver for Prism54 USB adaptors.
@@ -267,11 +249,11 @@ config ADK_KPACKAGE_KMOD_P54_USB
config ADK_KPACKAGE_KMOD_RT2400PCI
prompt "kmod-rt2400pci............... Ralink rt2400"
tristate
- default n
select ADK_KERNEL_RT2X00
select ADK_KERNEL_MAC80211_LEDS
depends on ADK_KPACKAGE_KMOD_MAC80211
depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI
+ default n
help
This adds support for rt2400 wireless chipset family.
Supported chips: RT2460.
@@ -279,11 +261,11 @@ config ADK_KPACKAGE_KMOD_RT2400PCI
config ADK_KPACKAGE_KMOD_RT2500PCI
prompt "kmod-rt2500pci............... Ralink rt2500"
tristate
- default n
select ADK_KERNEL_RT2X00
select ADK_KERNEL_MAC80211_LEDS
depends on ADK_KPACKAGE_KMOD_MAC80211
depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI
+ default n
help
This adds support for rt2500 wireless chipset family.
Supported chips: RT2560.
@@ -291,24 +273,24 @@ config ADK_KPACKAGE_KMOD_RT2500PCI
config ADK_KPACKAGE_KMOD_RT61PCI
prompt "kmod-rt61pci................. Ralink rt2501/rt61"
tristate
- default n
select ADK_KERNEL_RT2X00
select ADK_KERNEL_MAC80211_LEDS
select ADK_KPACKAGE_KMOD_CRC_ITU_T
select ADK_PACKAGE_RT61_FIRMWARE
depends on ADK_KPACKAGE_KMOD_MAC80211
depends on ADK_TARGET_WITH_MINIPCI || ADK_TARGET_WITH_PCI
+ default n
help
This adds support for rt2501 wireless chipset family.
Supported chips: RT2561, RT2561S & RT2661.
config ADK_KERNEL_RT2X00_DEBUG
prompt "enable debugging info"
+ boolean
depends on ADK_KPACKAGE_KMOD_RT61PCI || \
ADK_KPACKAGE_KMOD_RT2500PCI || \
ADK_KPACKAGE_KMOD_RT2400PCI
default n
- boolean
help
endmenu
diff --git a/target/x86/target.mk b/target/x86/target.mk
index 58b2217de..356e388ec 100644
--- a/target/x86/target.mk
+++ b/target/x86/target.mk
@@ -2,4 +2,4 @@ include $(TOPDIR)/mk/kernel-ver.mk
ARCH:= x86
CPU_ARCH:= i686
TARGET_OPTIMIZATION:= -O2 -pipe
-TARGET_CFLAGS_ARCH:= -march=pentium-m
+TARGET_CFLAGS_ARCH:= $(ADK_TARGET_CFLAGS)
diff --git a/target/x86_64/target.mk b/target/x86_64/target.mk
index 4344e1ee6..53d0acf59 100644
--- a/target/x86_64/target.mk
+++ b/target/x86_64/target.mk
@@ -2,4 +2,4 @@ include $(TOPDIR)/mk/kernel-ver.mk
ARCH:= x86
CPU_ARCH:= x86_64
TARGET_OPTIMIZATION:= -O2 -pipe
-TARGET_CFLAGS_ARCH:= -march=amdfam10
+TARGET_CFLAGS_ARCH:= $(ADK_TARGET_CFLAGS)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 11:53:35 +0000